Home About
Services Services Residential Garage Floor Epoxy Flake Epoxy Metallic Epoxy Garage Floors Garage Floor Restoration Non-Slip Epoxy Floor Residential Concrete Floor Polishing Polyurethane Floors Quartz System Self-Leveling Overlays Sleeper System Floor Outdoor Patio Coatings Terrace Restoration Waterproofing Commercial Commercial Epoxy Flooring Commercial Flake Epoxy Commercial Metallic Floors Commercial Floor Painting Commercial Concrete Floor Polishing Prep Concrete Grinding Concrete Sealing Concrete Floor Prep Chemical-Resistant Novolac Epoxy
Areas Service Areas
Blount County, AL Blount County, AL Oneonta, AL
Calhoun County, AL Calhoun County, AL Anniston, AL Jacksonville, AL Oxford, AL Piedmont, AL
Carroll County, GA Carroll County, GA Carrollton, GA Mount Zion, GA Villa Rica, GA
Cherokee County, AL Cherokee County, AL Centre, AL
Clay County, AL Clay County, AL Lineville, AL
Cleburne County, AL Cleburne County, AL Edwardsville, AL Heflin, AL
DeKalb County, AL DeKalb County, AL Fort Payne, AL Rainsville, AL
Etowah County, AL Etowah County, AL Boaz, AL Gadsden, AL Glencoe, AL Hokes Bluff, AL Rainbow City, AL Southside, AL
Floyd County, GA Floyd County, GA Rome, GA
Haralson County, GA Haralson County, GA Bremen, GA Tallapoosa, GA
Jefferson County, AL Jefferson County, AL Birmingham, AL Clay, AL Fultondale, AL Gardendale, AL Irondale, AL Leeds, AL Mountain Brook, AL Pinson, AL Trussville, AL Vestavia Hills, AL Warrior, AL
Marshall County, AL Marshall County, AL Albertville, AL Guntersville, AL
Polk County, GA Polk County, GA Cedartown, GA
Randolph County, AL Randolph County, AL Roanoke, AL
Shelby County, AL Shelby County, AL Chelsea, AL Columbiana, AL Harpersville, AL Pelham, AL Vincent, AL Westover, AL Wilsonville, AL
St. Clair County, AL St. Clair County, AL Argo, AL Ashville, AL Margaret, AL Moody, AL Odenville, AL Pell City, AL Ragland, AL Springville, AL
Talladega County, AL Talladega County, AL Childersburg, AL Lincoln, AL Sylacauga, AL Talladega, AL
Tallapoosa County, AL Tallapoosa County, AL Alexander City, AL Dadeville, AL Daviston, AL New Site, AL
Gallery Blog Contact
Call · (256) 365-6535
Skip to content
White house entry with a timber-framed porch, double wood doors, and a light gray porch floor
Northeast Alabama, sixty miles out of Anniston

Concrete floor coatings across Calhoun County

Home county. Anniston, Oxford, Jacksonville and Piedmont sit within twenty minutes of the shop, so this is where most of the work happens and where a same-week look at a floor is easiest.

Coating concrete in Calhoun County

A lot of Calhoun County housing went up between the fifties and the eighties around the Army depot and the mills, which means hard-troweled slabs with a tight, closed surface. They look fine and they reject a coating unless they are properly ground, which is exactly why so many store-bought garage kits in this county peeled inside a year.

Shanks Concrete Coatings works out of Anniston, and Calhoun County sits inside the sixty-mile radius Taylor covers. Every floor starts the same way regardless of which county it is in: the slab is opened with a diamond grinder, cracks and spalls are repaired, and only then does anything get applied. All twenty-two systems are available here.

Every county we cover
Cream, tan, and black flake floor in a pale yellow room with a drop ceiling

Where Shanks works in this county

Distances are measured from the shop in Anniston. If your town is between two of these, it is almost certainly still inside the radius.

A worker rolling a glossy brown floor coating in an empty white room

Anniston, AL

Home base, where the trailer lives.

Gray flake floor on a covered patio with timber posts, ceiling fans, and a stone fireplace

Oxford, AL

6 miles from the shop in Anniston.

Jacksonville, AL

10 miles from the shop in Anniston.

Piedmont, AL

21 miles from the shop in Anniston.

Systems available across Calhoun County

Warm brown stained and sealed floor in a double-height room, viewed from the loft during construction

Garage Floor Epoxy

Ground, patched and coated so hot tires and dropped tools do not mark it.

Gray flake pool deck around a swimming pool, enclosed by a white fence

Flake Epoxy

Vinyl chip in a pigmented base under clear. The most requested floor here.

Pewter and silver metallic epoxy floor swirling across a gray-walled room with white doors

Metallic Epoxy

Pearl pigment moved through resin so the floor reads like poured stone.

Grind and Seal

The concrete you already own, opened up, stained if you want, and sealed.

Patio Coatings

Textured, UV-stable finishes for porches, patios and pool surrounds.

Commercial Epoxy

Shop, warehouse and showroom floors specified for the actual use.

All twenty-two systems

What happens after you call

A call back the same day

Usually within working hours, Monday to Friday. A couple of questions about the room and the slab, then a time to come out that suits you.

A look at the actual floor

Measured, checked for moisture where it matters, and assessed for repair. Free anywhere inside the sixty-mile radius, including every town on this page.

A number in writing

The system, the preparation it needs, the schedule and the price. Nothing to sign on the doorstep and no pressure attached to it.

Three to four days on site

Three to four days for a typical garage, with Taylor on site for the grind, the repair, the broadcast and the topcoat, then a walk-through at the end.

What decides whether it lasts

What repair actually involves

Cracks get chased out into a V with a saw rather than simply filled, so the repair has shoulders to hold onto, then filled with a rigid polyurea that can be ground flush the same day. Spalled edges near a garage door, where water has sat and frozen for a few winters, are rebuilt with a polymer-modified patch. None of this shows in the finished floor, which is precisely why it gets skipped by people quoting the cheapest number.

Why the grinder decides everything

Almost every failed garage floor starts the same way: a coating rolled onto concrete that was never opened up. A troweled slab has a tight, closed surface, and resin sitting on top of it has nothing to grip. Diamond grinding cuts that skin away and leaves a profile like fine sandpaper, which is what a coating actually bonds into. It is the loudest, dirtiest and least glamorous day of the job, and it is the one that decides whether the floor is still tight in ten years.

The honest answer, including when it is cheaper. If a grind and seal will serve your room better than a full flake system, that is what you will be told, even though it is the smaller job. The same goes for timing: a slab poured last month is not ready, and coating green concrete is one of the few genuinely unfixable mistakes in this trade. Waiting a few weeks costs nothing; getting it wrong costs the whole floor.

Which floor for which room

Most people call about one system and end up with a different one, because the room decides more than the brochure does. A quick way to narrow it down:

It is a finished room you look at

Metallic, if you want the floor to be the feature, or polished concrete if you want it quiet. Metallic gives you flowing depth that no two floors share; polishing gives you the slab itself, refined, with nothing on top that can ever peel.

It gets wet or greasy

Quartz or a non-slip build. Both put graded aggregate into the surface so there is real traction underfoot, and both can be coved up the wall and sloped to a drain so the room can be properly washed down rather than just mopped.

You like the concrete you already have

Grind and seal. The slab is opened up, optionally stained, and sealed. It costs less than a full coating system, it keeps the character of the concrete, and on a stamped patio or an older shop floor it is very often the better-looking answer.

It is outside

A textured patio coating with a UV-stable topcoat. Color choice matters more outdoors than anywhere else, because a dark smooth surface around a pool gets hot enough to be unpleasant barefoot in an Alabama July.

Read the detail on each system

Calhoun County, AL

Shanks Concrete Coatings is based in Anniston and covers Calhoun County as part of its regular working area. Licensed and insured, Alabama #2602341.

Calhoun County questions

Do you charge extra to come out to Calhoun County?

No. Calhoun County is inside the sixty-mile working radius, so it is quoted the same as a job in Anniston. The drive is Taylor’s problem, not yours.

How soon could you look at a floor in Calhoun County?

Usually within the same week for a look, and the schedule for the work itself depends on the weather and what is already booked. Resin cures on a temperature and humidity window, so nothing gets squeezed in ahead of a storm.

Residential and commercial both?

Both. Garages, basements, porches and patios on the residential side, and shop, warehouse and showroom floors on the commercial side.

What if my town is not on the list?

Call anyway. The list covers the towns Shanks works in most often across Calhoun County, but the radius takes in plenty of smaller communities between them.

Do you need to see the floor before quoting?

Yes, and anyone who quotes concrete coating over the phone is guessing. The condition of the slab is most of the price, and that cannot be assessed by description.

What is the most common job in Calhoun County?

Flake garage floors, by a wide margin, followed by basements and covered porches. On the commercial side it is shop and warehouse floors that have never had anything on them and are shedding dust under traffic.

Can several floors be done on one visit?

Yes, and it is worth asking. A garage and a porch done together share the same mobilization, the same grinder setup and the same cleanup, so the second floor is always cheaper than it would be as a separate job.

Floors in Calhoun County

Tell Taylor the town, the square footage and what the slab looks like now, and he will give you a real number.