Birmingham’s concrete floor coatings
Flake, metallic, quartz, polished and sealed floors for Birmingham homes and businesses. It is about 58 miles from the shop in Anniston, which is a routine run.
What Shanks coats in Birmingham
The work in town splits fairly evenly between garage floors and covered porches, with the occasional shop floor for someone running a business from home. It is about 58 miles from the shop in Anniston, which is a routine run.
Jefferson County is the far western end of the radius and the most varied. Mountain Brook and Vestavia basements tend to be decorative metallic and polished work; Trussville and Gardendale are newer garages taking flake; and there is a steady run of shop and warehouse floors around the industrial corridor.
Whatever the slab turns out to be, the order of work does not change: grind it open, repair what is broken, then coat it. The twenty-two systems Shanks installs all sit on top of that same preparation.
Systems Birmingham homeowners ask for
Garage Floor Epoxy
Ground, patched and coated so hot tires and dropped tools do not mark it.
Flake Epoxy
Vinyl chip in a pigmented base under clear. The most requested floor here.
Metallic Epoxy
Pearl pigment moved through resin so the floor reads like poured stone.
Grind and Seal
The concrete you already own, opened up, stained if you want, and sealed.
Patio Coatings
Textured, UV-stable finishes for porches, patios and pool surrounds.
Commercial Epoxy
Shop, warehouse and showroom floors specified for the actual use.
What decides whether it lasts
What repair actually involves
Cracks get chased out into a V with a saw rather than simply filled, so the repair has shoulders to hold onto, then filled with a rigid polyurea that can be ground flush the same day. Spalled edges near a garage door, where water has sat and frozen for a few winters, are rebuilt with a polymer-modified patch. None of this shows in the finished floor, which is precisely why it gets skipped by people quoting the cheapest number.
Moisture is the other half of it
Concrete is not waterproof. On a slab poured without a vapor barrier, or one sitting against damp ground, water vapor moves up through the pores continuously. Put a sealed coating over that and the vapor has nowhere to go, so it collects underneath and pushes the coating off in sheets. This is why a below-grade floor gets tested with a calcium chloride kit or a relative humidity probe before anyone quotes it, and why the honest answer is sometimes a mitigating primer first.
There is no crew that turns up instead of the owner, and no salesman between you and the person holding the squeegee. Taylor Shanks quotes the job, runs the grinder, mixes the resin and does the walk-through at the end. On a job this size that continuity is the difference between a floor built to a standard and one built to a schedule.
The owner does the work
There is no salesman in the middle here. Taylor looks at the floor, tells you what it needs, and then does that work himself. Taylor Shanks trained with Brian Phillips, The Epoxy Dude, in southern Indiana, and he and Heather have run Shanks Concrete Coatings since 2025. Licensed and insured, Alabama #2602341.
If the honest answer for your Birmingham floor is a cheaper system than the one you called about, that is what you will be told. More about how Shanks works.
See finished floorsWhich floor for which room
The hardest part for most homeowners is choosing between systems that all look good in photographs. Here is how they actually differ in use:
You like the concrete you already have
Grind and seal. The slab is opened up, optionally stained, and sealed. It costs less than a full coating system, it keeps the character of the concrete, and on a stamped patio or an older shop floor it is very often the better-looking answer.
It is outside
A textured patio coating with a UV-stable topcoat. Color choice matters more outdoors than anywhere else, because a dark smooth surface around a pool gets hot enough to be unpleasant barefoot in an Alabama July.
The slab is in rough shape
Restoration or a self-leveling overlay before anything decorative. A coating cannot bridge a surface that has broken down; the slab has to be rebuilt flat first, and then it takes any system you like.
You park a vehicle on it
Flake, almost every time. The chip field hides tire marks and dust, the texture stops it being slick when you track rain in, and the polyaspartic topcoat handles hot tires without softening. It is the most requested floor Shanks installs and it is the right call for the large majority of garages.
Other towns in Jefferson County
Shanks covers the whole county. If you are between two of these, you are still inside the radius, and the Jefferson County page lists every town.
Trussville, AL
43 miles from the shop in Anniston.
Leeds, AL
45 miles from the shop in Anniston.
Clay, AL
46 miles from the shop in Anniston.
Pinson, AL
49 miles from the shop in Anniston.
Irondale, AL
50 miles from the shop in Anniston.
Birmingham questions
Do you actually work in Birmingham?
Yes. It is about 58 miles from the shop in Anniston, which is a routine run. Birmingham is inside the sixty-mile radius Shanks covers out of Anniston, and it is quoted at the same rate as a job in town.
How long will my floor take?
About three to four days for a standard two-car garage: grinding, repair and base coat, broadcast and scrape, then the topcoat. Bigger or more damaged floors take longer, and Taylor will give you the real schedule before starting.
Can you coat a basement here?
Often yes, but below-grade slabs get moisture-tested first. Vapor coming up through concrete will push a coating off no matter how good the prep was, so it is measured rather than assumed.
Will you look at it before quoting?
Always. The condition of the slab is most of the price, so a number over the phone would be a guess. Taylor looks at the floor, then gives you a real number in writing.
What is the most popular floor around here?
Flake, by a distance. It hides dust and tire marks, it is not slick when wet, and it suits both a garage and a finished basement.
Floors in Birmingham
Square footage, what the room is used for, and what the slab looks like now. That is enough for a real number on a Birmingham floor.