Home About
Services Services Residential Garage Floor Epoxy Flake Epoxy Metallic Epoxy Garage Floors Garage Floor Restoration Non-Slip Epoxy Floor Residential Concrete Floor Polishing Polyurethane Floors Quartz System Self-Leveling Overlays Sleeper System Floor Outdoor Patio Coatings Terrace Restoration Waterproofing Commercial Commercial Epoxy Flooring Commercial Flake Epoxy Commercial Metallic Floors Commercial Floor Painting Commercial Concrete Floor Polishing Prep Concrete Grinding Concrete Sealing Concrete Floor Prep Chemical-Resistant Novolac Epoxy
Areas Service Areas
Blount County, AL Blount County, AL Oneonta, AL
Calhoun County, AL Calhoun County, AL Anniston, AL Jacksonville, AL Oxford, AL Piedmont, AL
Carroll County, GA Carroll County, GA Carrollton, GA Mount Zion, GA Villa Rica, GA
Cherokee County, AL Cherokee County, AL Centre, AL
Clay County, AL Clay County, AL Lineville, AL
Cleburne County, AL Cleburne County, AL Edwardsville, AL Heflin, AL
DeKalb County, AL DeKalb County, AL Fort Payne, AL Rainsville, AL
Etowah County, AL Etowah County, AL Boaz, AL Gadsden, AL Glencoe, AL Hokes Bluff, AL Rainbow City, AL Southside, AL
Floyd County, GA Floyd County, GA Rome, GA
Haralson County, GA Haralson County, GA Bremen, GA Tallapoosa, GA
Jefferson County, AL Jefferson County, AL Birmingham, AL Clay, AL Fultondale, AL Gardendale, AL Irondale, AL Leeds, AL Mountain Brook, AL Pinson, AL Trussville, AL Vestavia Hills, AL Warrior, AL
Marshall County, AL Marshall County, AL Albertville, AL Guntersville, AL
Polk County, GA Polk County, GA Cedartown, GA
Randolph County, AL Randolph County, AL Roanoke, AL
Shelby County, AL Shelby County, AL Chelsea, AL Columbiana, AL Harpersville, AL Pelham, AL Vincent, AL Westover, AL Wilsonville, AL
St. Clair County, AL St. Clair County, AL Argo, AL Ashville, AL Margaret, AL Moody, AL Odenville, AL Pell City, AL Ragland, AL Springville, AL
Talladega County, AL Talladega County, AL Childersburg, AL Lincoln, AL Sylacauga, AL Talladega, AL
Tallapoosa County, AL Tallapoosa County, AL Alexander City, AL Dadeville, AL Daviston, AL New Site, AL
Gallery Blog Contact
Call · (256) 365-6535
Skip to content
Floor grinder and dust extractor on a bare slab in a living room with a fireplace and French doors
Marshall County, AL

Guntersville’s concrete floor coatings

Flake, metallic, quartz, polished and sealed floors for Guntersville homes and businesses. It is about 54 miles from the shop in Anniston, which is a routine run.

What Shanks coats in Guntersville

The work in town splits fairly evenly between garage floors and covered porches, with the occasional shop floor for someone running a business from home. It is about 54 miles from the shop in Anniston, which is a routine run.

Marshall County work clusters around Guntersville Lake: covered patios, boathouses and garages at weekend places, where UV stability and traction matter more than abrasion resistance.

Whatever the slab turns out to be, the order of work does not change: grind it open, repair what is broken, then coat it. The twenty-two systems Shanks installs all sit on top of that same preparation.

Pewter and silver metallic epoxy floor swirling across a gray-walled room with white doors

Systems Guntersville homeowners ask for

Cream, tan, and black flake floor in a pale yellow room with a drop ceiling

Garage Floor Epoxy

Ground, patched and coated so hot tires and dropped tools do not mark it.

Dark charcoal and white flake floor in a garage with an open floor hatch

Flake Epoxy

Vinyl chip in a pigmented base under clear. The most requested floor here.

Bare, dusty concrete floor in a room painted with a children's forest mural

Metallic Epoxy

Pearl pigment moved through resin so the floor reads like poured stone.

Grind and Seal

The concrete you already own, opened up, stained if you want, and sealed.

Patio Coatings

Textured, UV-stable finishes for porches, patios and pool surrounds.

Commercial Epoxy

Shop, warehouse and showroom floors specified for the actual use.

What decides whether it lasts

Why the topcoat matters more than the base

The layer you actually walk on, wash and scuff is the clear coat, not the color underneath. A cheap job leaves a standard epoxy as the top layer, and epoxy ambers in daylight, so a garage with a west-facing door turns yellow within a couple of years. A UV-stable polyaspartic or aliphatic urethane holds its color, cures fast enough to walk on the next day, and can be scuffed and recoated years later without disturbing what is underneath.

What repair actually involves

Cracks get chased out into a V with a saw rather than simply filled, so the repair has shoulders to hold onto, then filled with a rigid polyurea that can be ground flush the same day. Spalled edges near a garage door, where water has sat and frozen for a few winters, are rebuilt with a polymer-modified patch. None of this shows in the finished floor, which is precisely why it gets skipped by people quoting the cheapest number.

There is no crew that turns up instead of the owner, and no salesman between you and the person holding the squeegee. Taylor Shanks quotes the job, runs the grinder, mixes the resin and does the walk-through at the end. On a job this size that continuity is the difference between a floor built to a standard and one built to a schedule.

The owner does the work

The same person who looks at your slab is the one running the grinder on it, so nothing gets lost between the quote and the work. Taylor Shanks trained with Brian Phillips, The Epoxy Dude, in southern Indiana, and he and Heather have run Shanks Concrete Coatings since 2025. Licensed and insured, Alabama #2602341.

If the honest answer for your Guntersville floor is a cheaper system than the one you called about, that is what you will be told. More about how Shanks works.

See finished floors

Which floor for which room

The hardest part for most homeowners is choosing between systems that all look good in photographs. Here is how they actually differ in use:

The slab is in rough shape

Restoration or a self-leveling overlay before anything decorative. A coating cannot bridge a surface that has broken down; the slab has to be rebuilt flat first, and then it takes any system you like.

You park a vehicle on it

Flake, almost every time. The chip field hides tire marks and dust, the texture stops it being slick when you track rain in, and the polyaspartic topcoat handles hot tires without softening. It is the most requested floor Shanks installs and it is the right call for the large majority of garages.

It is a finished room you look at

Metallic, if you want the floor to be the feature, or polished concrete if you want it quiet. Metallic gives you flowing depth that no two floors share; polishing gives you the slab itself, refined, with nothing on top that can ever peel.

It gets wet or greasy

Quartz or a non-slip build. Both put graded aggregate into the surface so there is real traction underfoot, and both can be coved up the wall and sloped to a drain so the room can be properly washed down rather than just mopped.

Read the detail on each system

Other towns in Marshall County

Shanks covers the whole county. If you are between two of these, you are still inside the radius, and the Marshall County page lists every town. The smaller unincorporated communities between these towns sit inside the radius as well, so it is worth calling even if yours is not named here.

Broken brown ceramic tile being pried off a floor beside a painted mural, with a hammer and dustpan

Albertville, AL

47 miles from the shop in Anniston.

Guntersville questions

Do you actually work in Guntersville?

Yes. It is about 54 miles from the shop in Anniston, which is a routine run. Guntersville is inside the sixty-mile radius Shanks covers out of Anniston, and it is quoted at the same rate as a job in town.

How long will my floor take?

About three to four days for a standard two-car garage: grinding, repair and base coat, broadcast and scrape, then the topcoat. Bigger or more damaged floors take longer, and Taylor will give you the real schedule before starting.

Can you coat a basement here?

Often yes, but below-grade slabs get moisture-tested first. Vapor coming up through concrete will push a coating off no matter how good the prep was, so it is measured rather than assumed.

Will you look at it before quoting?

Always. The condition of the slab is most of the price, so a number over the phone would be a guess. Taylor looks at the floor, then gives you a real number in writing.

What is the most popular floor around here?

Flake, by a distance. It hides dust and tire marks, it is not slick when wet, and it suits both a garage and a finished basement.

Floors in Guntersville

Square footage, what the room is used for, and what the slab looks like now. That is enough for a real number on a Guntersville floor.