Concrete floor coatings across Talladega County
Talladega, Sylacauga, Lincoln and Childersburg, south of Anniston along the 21 and the 280.
Coating concrete in Talladega County
Talladega County covers a wide spread of housing ages and a fair amount of industrial floor space around Sylacauga and Childersburg, so the work here swings between residential garages and shop floors that need a harder build.
Shanks Concrete Coatings works out of Anniston, and Talladega County sits inside the sixty-mile radius Taylor covers. Every floor starts the same way regardless of which county it is in: the slab is opened with a diamond grinder, cracks and spalls are repaired, and only then does anything get applied. All twenty-two systems are available here.
Every county we cover
Where Shanks works in this county
Distances are measured from the shop in Anniston. If your town is between two of these, it is almost certainly still inside the radius.
Lincoln, AL
19 miles from the shop in Anniston.
Talladega, AL
24 miles from the shop in Anniston.
Childersburg, AL
40 miles from the shop in Anniston.
Sylacauga, AL
43 miles from the shop in Anniston.
Systems available across Talladega County
Garage Floor Epoxy
Ground, patched and coated so hot tires and dropped tools do not mark it.
Flake Epoxy
Vinyl chip in a pigmented base under clear. The most requested floor here.
Metallic Epoxy
Pearl pigment moved through resin so the floor reads like poured stone.
Grind and Seal
The concrete you already own, opened up, stained if you want, and sealed.
Patio Coatings
Textured, UV-stable finishes for porches, patios and pool surrounds.
Commercial Epoxy
Shop, warehouse and showroom floors specified for the actual use.
What happens after you call
A call back the same day
Usually within working hours, Monday to Friday. A couple of questions about the room and the slab, then a time to come out that suits you.
A look at the actual floor
Measured, checked for moisture where it matters, and assessed for repair. Free anywhere inside the sixty-mile radius, including every town on this page.
A number in writing
The system, the preparation it needs, the schedule and the price. Nothing to sign on the doorstep and no pressure attached to it.
Three to four days on site
Three to four days for a typical garage, with Taylor on site for the grind, the repair, the broadcast and the topcoat, then a walk-through at the end.
What decides whether it lasts
Why the topcoat matters more than the base
The layer you actually walk on, wash and scuff is the clear coat, not the color underneath. A cheap job leaves a standard epoxy as the top layer, and epoxy ambers in daylight, so a garage with a west-facing door turns yellow within a couple of years. A UV-stable polyaspartic or aliphatic urethane holds its color, cures fast enough to walk on the next day, and can be scuffed and recoated years later without disturbing what is underneath.
Moisture is the other half of it
Concrete is not waterproof. On a slab poured without a vapor barrier, or one sitting against damp ground, water vapor moves up through the pores continuously. Put a sealed coating over that and the vapor has nowhere to go, so it collects underneath and pushes the coating off in sheets. This is why a below-grade floor gets tested with a calcium chloride kit or a relative humidity probe before anyone quotes it, and why the honest answer is sometimes a mitigating primer first.
No pricing over the phone. Anyone who quotes a concrete floor sight unseen is guessing, because the condition of the slab is most of the cost. Two garages of identical size can be a full day apart in preparation once you factor in old paint, glue, cracking and how much of the surface has broken down. Taylor looks at the floor, measures it, tells you what it needs, and then puts a real number in writing.
Which floor for which room
Most people call about one system and end up with a different one, because the room decides more than the brochure does. A quick way to narrow it down:
You like the concrete you already have
Grind and seal. The slab is opened up, optionally stained, and sealed. It costs less than a full coating system, it keeps the character of the concrete, and on a stamped patio or an older shop floor it is very often the better-looking answer.
It is outside
A textured patio coating with a UV-stable topcoat. Color choice matters more outdoors than anywhere else, because a dark smooth surface around a pool gets hot enough to be unpleasant barefoot in an Alabama July.
The slab is in rough shape
Restoration or a self-leveling overlay before anything decorative. A coating cannot bridge a surface that has broken down; the slab has to be rebuilt flat first, and then it takes any system you like.
You park a vehicle on it
Flake, almost every time. The chip field hides tire marks and dust, the texture stops it being slick when you track rain in, and the polyaspartic topcoat handles hot tires without softening. It is the most requested floor Shanks installs and it is the right call for the large majority of garages.
Talladega County, AL
Shanks Concrete Coatings is based in Anniston and covers Talladega County as part of its regular working area. Licensed and insured, Alabama #2602341.
Talladega County questions
Do you charge extra to come out to Talladega County?
No. Talladega County is inside the sixty-mile working radius, so it is quoted the same as a job in Anniston. The drive is Taylor’s problem, not yours.
How soon could you look at a floor in Talladega County?
Usually within the same week for a look, and the schedule for the work itself depends on the weather and what is already booked. Resin cures on a temperature and humidity window, so nothing gets squeezed in ahead of a storm.
Residential and commercial both?
Both. Garages, basements, porches and patios on the residential side, and shop, warehouse and showroom floors on the commercial side.
What if my town is not on the list?
Call anyway. The list covers the towns Shanks works in most often across Talladega County, but the radius takes in plenty of smaller communities between them.
Do you need to see the floor before quoting?
Yes, and anyone who quotes concrete coating over the phone is guessing. The condition of the slab is most of the price, and that cannot be assessed by description.
What is the most common job in Talladega County?
Flake garage floors, by a wide margin, followed by basements and covered porches. On the commercial side it is shop and warehouse floors that have never had anything on them and are shedding dust under traffic.
Can several floors be done on one visit?
Yes, and it is worth asking. A garage and a porch done together share the same mobilization, the same grinder setup and the same cleanup, so the second floor is always cheaper than it would be as a separate job.
Floors in Talladega County
Tell Taylor the town, the square footage and what the slab looks like now, and he will give you a real number.