Concrete floor coatings across Cleburne County
Heflin and Edwardsville, east toward the Georgia line on I-20.
Coating concrete in Cleburne County
Cleburne County is rural, which in practice means bigger detached shops and barns rather than attached garages. Those buildings often have slabs poured without a vapor barrier underneath, so testing matters more here than it does in a subdivision.
Shanks Concrete Coatings works out of Anniston, and Cleburne County sits inside the sixty-mile radius Taylor covers. Every floor starts the same way regardless of which county it is in: the slab is opened with a diamond grinder, cracks and spalls are repaired, and only then does anything get applied. All twenty-two systems are available here.
Every county we cover
Where Shanks works in this county
Distances are measured from the shop in Anniston. If your town is between two of these, it is almost certainly still inside the radius.
Heflin, AL
14 miles from the shop in Anniston.
Edwardsville, AL
27 miles from the shop in Anniston.
Systems available across Cleburne County
Garage Floor Epoxy
Ground, patched and coated so hot tires and dropped tools do not mark it.
Flake Epoxy
Vinyl chip in a pigmented base under clear. The most requested floor here.
Metallic Epoxy
Pearl pigment moved through resin so the floor reads like poured stone.
Grind and Seal
The concrete you already own, opened up, stained if you want, and sealed.
Patio Coatings
Textured, UV-stable finishes for porches, patios and pool surrounds.
Commercial Epoxy
Shop, warehouse and showroom floors specified for the actual use.
What happens after you call
A call back the same day
Usually within working hours, Monday to Friday. A couple of questions about the room and the slab, then a time to come out that suits you.
A look at the actual floor
Measured, checked for moisture where it matters, and assessed for repair. Free anywhere inside the sixty-mile radius, including every town on this page.
A number in writing
The system, the preparation it needs, the schedule and the price. Nothing to sign on the doorstep and no pressure attached to it.
Three to four days on site
Three to four days for a typical garage, with Taylor on site for the grind, the repair, the broadcast and the topcoat, then a walk-through at the end.
What decides whether it lasts
Why the grinder decides everything
Almost every failed garage floor starts the same way: a coating rolled onto concrete that was never opened up. A trowelled slab has a tight, closed surface, and resin sitting on top of it has nothing to grip. Diamond grinding cuts that skin away and leaves a profile like fine sandpaper, which is what a coating actually bonds into. It is the loudest, dirtiest and least glamorous day of the job, and it is the one that decides whether the floor is still tight in ten years.
Moisture is the other half of it
Concrete is not waterproof. On a slab poured without a vapor barrier, or one sitting against damp ground, water vapor moves up through the pores continuously. Put a sealed coating over that and the vapor has nowhere to go, so it collects underneath and pushes the coating off in sheets. This is why a below-grade floor gets tested with a calcium chloride kit or a relative humidity probe before anyone quotes it, and why the honest answer is sometimes a mitigating primer first.
The honest answer, including when it is cheaper. If a grind and seal will serve your room better than a full flake system, that is what you will be told, even though it is the smaller job. The same goes for timing: a slab poured last month is not ready, and coating green concrete is one of the few genuinely unfixable mistakes in this trade. Waiting a few weeks costs nothing; getting it wrong costs the whole floor.
Which floor for which room
Most people call about one system and end up with a different one, because the room decides more than the brochure does. A quick way to narrow it down:
It gets wet or greasy
Quartz or a non-slip build. Both put graded aggregate into the surface so there is real traction underfoot, and both can be coved up the wall and sloped to a drain so the room can be properly washed down rather than just mopped.
You like the concrete you already have
Grind and seal. The slab is opened up, optionally stained, and sealed. It costs less than a full coating system, it keeps the character of the concrete, and on a stamped patio or an older shop floor it is very often the better-looking answer.
It is outside
A textured patio coating with a UV-stable topcoat. Color choice matters more outdoors than anywhere else, because a dark smooth surface around a pool gets hot enough to be unpleasant barefoot in an Alabama July.
The slab is in rough shape
Restoration or a self-leveling overlay before anything decorative. A coating cannot bridge a surface that has broken down; the slab has to be rebuilt flat first, and then it takes any system you like.
Cleburne County, AL
Shanks Concrete Coatings is based in Anniston and covers Cleburne County as part of its regular working area. Licensed and insured, Alabama #2602341.
Cleburne County questions
Do you charge extra to come out to Cleburne County?
No. Cleburne County is inside the sixty-mile working radius, so it is quoted the same as a job in Anniston. The drive is Taylor’s problem, not yours.
How soon could you look at a floor in Cleburne County?
Usually within the same week for a look, and the schedule for the work itself depends on the weather and what is already booked. Resin cures on a temperature and humidity window, so nothing gets squeezed in ahead of a storm.
Residential and commercial both?
Both. Garages, basements, porches and patios on the residential side, and shop, warehouse and showroom floors on the commercial side.
What if my town is not on the list?
Call anyway. The list covers the towns Shanks works in most often across Cleburne County, but the radius takes in plenty of smaller communities between them.
Do you need to see the floor before quoting?
Yes, and anyone who quotes concrete coating over the phone is guessing. The condition of the slab is most of the price, and that cannot be assessed by description.
What is the most common job in Cleburne County?
Flake garage floors, by a wide margin, followed by basements and covered porches. On the commercial side it is shop and warehouse floors that have never had anything on them and are shedding dust under traffic.
Can several floors be done on one visit?
Yes, and it is worth asking. A garage and a porch done together share the same mobilization, the same grinder setup and the same cleanup, so the second floor is always cheaper than it would be as a separate job.
Floors in Cleburne County
Tell Taylor the town, the square footage and what the slab looks like now, and he will give you a real number.