Mountain Brook’s concrete floor coatings
Flake, metallic, quartz, polished and sealed floors for Mountain Brook homes and businesses. It is about 55 miles from the shop in Anniston, which is a routine run.
What Shanks coats in Mountain Brook
Basements come up often here, and those are the floors where the moisture question gets answered before anything else is discussed. It is about 55 miles from the shop in Anniston, which is a routine run.
Jefferson County is the far western end of the radius and the most varied. Mountain Brook and Vestavia basements tend to be decorative metallic and polished work; Trussville and Gardendale are newer garages taking flake; and there is a steady run of shop and warehouse floors around the industrial corridor.
Whatever the slab turns out to be, the order of work does not change: grind it open, repair what is broken, then coat it. The twenty-two systems Shanks installs all sit on top of that same preparation.
Systems Mountain Brook homeowners ask for
Garage Floor Epoxy
Ground, patched and coated so hot tires and dropped tools do not mark it.
Flake Epoxy
Vinyl chip in a pigmented base under clear. The most requested floor here.
Metallic Epoxy
Pearl pigment moved through resin so the floor reads like poured stone.
Grind and Seal
The concrete you already own, opened up, stained if you want, and sealed.
Patio Coatings
Textured, UV-stable finishes for porches, patios and pool surrounds.
Commercial Epoxy
Shop, warehouse and showroom floors specified for the actual use.
What decides whether it lasts
Why the grinder decides everything
Almost every failed garage floor starts the same way: a coating rolled onto concrete that was never opened up. A trowelled slab has a tight, closed surface, and resin sitting on top of it has nothing to grip. Diamond grinding cuts that skin away and leaves a profile like fine sandpaper, which is what a coating actually bonds into. It is the loudest, dirtiest and least glamorous day of the job, and it is the one that decides whether the floor is still tight in ten years.
What repair actually involves
Cracks get chased out into a V with a saw rather than simply filled, so the repair has shoulders to hold onto, then filled with a rigid polyurea that can be ground flush the same day. Spalled edges near a garage door, where water has sat and frozen for a few winters, are rebuilt with a polymer-modified patch. None of this shows in the finished floor, which is precisely why it gets skipped by people quoting the cheapest number.
If a grind and seal will serve your room better than a full flake system, that is what you will be told, even though it is the smaller job. The same goes for timing: a slab poured last month is not ready, and coating green concrete is one of the few genuinely unfixable mistakes in this trade. Waiting a few weeks costs nothing; getting it wrong costs the whole floor.
The owner does the work
You deal with the owner from the first phone call to the walk-through at the end. Nobody sells you a floor and then disappears. Taylor Shanks trained with Brian Phillips, The Epoxy Dude, in southern Indiana, and he and Heather have run Shanks Concrete Coatings since 2025. Licensed and insured, Alabama #2602341.
If the honest answer for your Mountain Brook floor is a cheaper system than the one you called about, that is what you will be told. More about how Shanks works.
See finished floorsWhich floor for which room
If you are trying to work out which floor you want before anyone comes out, this is the short version:
You like the concrete you already have
Grind and seal. The slab is opened up, optionally stained, and sealed. It costs less than a full coating system, it keeps the character of the concrete, and on a stamped patio or an older shop floor it is very often the better-looking answer.
It is outside
A textured patio coating with a UV-stable topcoat. Color choice matters more outdoors than anywhere else, because a dark smooth surface around a pool gets hot enough to be unpleasant barefoot in an Alabama July.
The slab is in rough shape
Restoration or a self-leveling overlay before anything decorative. A coating cannot bridge a surface that has broken down; the slab has to be rebuilt flat first, and then it takes any system you like.
You park a vehicle on it
Flake, almost every time. The chip field hides tire marks and dust, the texture stops it being slick when you track rain in, and the polyaspartic topcoat handles hot tires without softening. It is the most requested floor Shanks installs and it is the right call for the large majority of garages.
Other towns in Jefferson County
Shanks covers the whole county. If you are between two of these, you are still inside the radius, and the Jefferson County page lists every town.
Trussville, AL
43 miles from the shop in Anniston.
Leeds, AL
45 miles from the shop in Anniston.
Clay, AL
46 miles from the shop in Anniston.
Pinson, AL
49 miles from the shop in Anniston.
Irondale, AL
50 miles from the shop in Anniston.
Mountain Brook questions
Do you actually work in Mountain Brook?
Yes. It is about 55 miles from the shop in Anniston, which is a routine run. Mountain Brook is inside the sixty-mile radius Shanks covers out of Anniston, and it is quoted at the same rate as a job in town.
How long will my floor take?
About three to four days for a standard two-car garage: grinding, repair and base coat, broadcast and scrape, then the topcoat. Bigger or more damaged floors take longer, and Taylor will give you the real schedule before starting.
Can you coat a basement here?
Often yes, but below-grade slabs get moisture-tested first. Vapor coming up through concrete will push a coating off no matter how good the prep was, so it is measured rather than assumed.
Will you look at it before quoting?
Always. The condition of the slab is most of the price, so a number over the phone would be a guess. Taylor looks at the floor, then gives you a real number in writing.
What is the most popular floor around here?
Flake, by a distance. It hides dust and tire marks, it is not slick when wet, and it suits both a garage and a finished basement.
Floors in Mountain Brook
Square footage, what the room is used for, and what the slab looks like now. That is enough for a real number on a Mountain Brook floor.